How to Attach a Homemade Rain Water Barrel

August 5, 2012 - Make sure you like EcoJoes on Facebook to stay updated on green ways to save money and help the environment. Just click the "like" button below. Muchas gracias!


Righto, so a little while ago, I built me a homemade water barrel out of a trash can and assorted odds n’ ends. The only thing left to do was attach the barrel to my gutters to collect all that free rain water.

It turned out to be pretty easy to do, and I’ve been enjoying free rain water for my garden ever since, saving money and cutting down on my city-water usage. Bah-blam.

Supplies

Here’s what you’ll need to connect your rain barrel to your gutters:

  • 3 cinder blocks
  • Level
  • Shovel
  • Crowbar
  • Screwdriver
  • Flexible downspout
  • Boxcutter
I submit for your approval this here list of easy steps to connect your water barrel to the gutters of your (or a neighbor’s!) house.

Remove the Old Gutter

First, you need to get rid of the bottom part of your gutter to make room for your water barrel. I used a box cutter to cut the zip ties holding my cable to the gutter

It helps if you have a worried look on your face, like so:
Fiddlin' with the rain gutter

After that, I used a socket wrench to unscrew some metal bands that were holding the gutter to my house. Here’s an extreme closeup so you can actually feel like you’re there.
That screw has met his match

Next, I did a few quick pushups to limber up my muscles, then yanked the downspout out of the gutter. It looked a little something like this:
The Final Disconnection

Some of those aforementioned metal bands were still sticking around, but after a short talk with Mr. Crowbar, everything was ready for the new, flexible downspout!
That metal bracket doesn't stand a chance

Connect the Flexible Downspout

Slowly and ever-so-carefully, slide the flexible downspout onto the gutter.
Connecting the gutter

Reuse some of the screws that you removed from the old gutter, and screw the flexpipe onto the gutter.
Don't SCREW this part up!

Don’t overtighten them screws! When you’re done, it should look approximately like this:
The flexpipe is secured, I repeat, the flexpipe is secured

Lastly, feel free to reuse some of those metal bands to attach the flexible downspout to the house. Don’t attach it so low that there’s not enough room for the water barrel!
Reusing metal bands

Prepare the Base for the Water Barrel

I got my cinder blocks off of Freecycle, which is a handy website where people can give away things they no longer need.

One of the Freecyclers, who goes by the name of Tallulah, alertly sent me a warning about using only two cinder blocks for the water barrel.

Parents, you may want to cover your children’s eyes, for this is, truly, a tale of horror.

Please forgive me for butting in but I saw your request for two cinder blocks to support your rain barrel. I would heartily reccomend that you use three or four cinder blocks to ensure a complete flooring for the rain barrel.

I used two on mine and after a short while the weight of the water must have put too much stress on the sides of the barrel. The unsupported sides basically caved in and it fell sideways into the house, smashing a window and gushing massive amounts of water. Still too heavy to move with the remaining water it was a real pain to empty.

Had it been on a completely level platform that left no part unsupported I thing it would have been just fine.
Grrr, lol.
Lesson learned the hard way. Just wanted to spare you the same fate.

A harrowing story, to be sure. I heeded that advice and went with the Classic 3-Cinder-Block Base.

Use your shovel to level out the area where your cinder blocks will sit. Make sure it’s level by using your level, which will tell you if it’s level.

It can take awhile to get it good and level, but it’s important — nay, downright imperative — that you get that sucker leveled out.

You’re going to have a whole bunch o’ water sitting on it, and you don’t want that barrel tipping over.

Level enough, I guess

Bring in the Rain Water Barrel

Woohoo! You’re almost done. Chuck the rain barrel up onto the cinder blocks, and adjust it so the water barrel is basically 100% supported by the blocks.

Make sure the hose spout sticks out past the blocks! Please ignore the luxury car in the background.
More fun than a barrel o' monkeys!

Now’s the fun part. Bend the flexible downspout around until it’s above the opening on the top of the rain barrel.

Make sure the downspout is pointed down, so the water doesn’t pool up in it and get all stagnant and mess. There’ll be more than enough stagnant water in the barrel soon enough!
Water barrel, ready for action

Congratulations! You’ve completed the hookup of your very own homemade rain water barrel!

You’ll be saving on your water bill in no time, and the uses of rain water (gardening, outdoor showering, gardening again) are as boundless as your imagination.

Posted in gardening, off the grid, projects, save money, water on Sunday, August 5th, 2012 at 11:56 AM.

2 Responses to “How to Attach a Homemade Rain Water Barrel”

  1. Anonymous says:

    [url=http://www.bestevance.com/rolex/gmt/index.htm]それ以外に、一連の専門を今回の展示会は苦心して設計する演技やゲームインタラクティブコーナーも見せたTIMEX(タイメックス)のブランドの精髄。モデルの演技がTIMEX(タイメックス)によって表項のユニーク性格;時計パズルや幸運ルーレットなどゲームを消費者は楽で楽しい雰囲気の中で増加TIMEX(タイメックス)のブランドや製品の理解。非常に魅力的なプロモーション活動も同時に展開、活動現場購入任意の1項のTIMEX(タイメックス)を得ることができる腕時計、罰金の携帯ストラップ;購入TIMEX(タイメックス)製品の満1200元、すぐ現場獲得真皮パスポートバッグ1匹。多くの見事な貢献活動をもたらすのリンクや必ずすべての消費者のブランドと体験を非凡。[/url]

  2. Anonymous says:

    [url=http://www.ooobag.com/tokei/bvlgari/assioma/ac28cdefce4de5dd.html]スーパーコピーロレックス,スーパーコピーロレックス時計通販スーパー コピー品その他の世界一流ロレックススーパーコピー時計品を扱っています。ヴィトン コピー、ヴィトン コピー 激安(N品)専門店”[/url]

Leave a Reply